Maumee Bay Aquatics

We will be happy to help you with all of your needs. You may order by calling us Toll Free at 866-446-7663 or e-mail your request to Nancy Downes. Diffusers & Electric Air Compressors
	Diffusers 10" - $75.00 14" - $115.00 20" - $150.00 Diffusers are complete with stand, rope and float. Diffusers are made of EPDM rubber and produces fine bubble aeration. These diffusers consist of built-in check valves which allows for self sealing and self cleaning.



Click for benefits.	Electric Air Compressors Please be aware of other types of air compressors that are available but are ineffective, for aeration. Compressors such as diaphragm or linear cannot produce adequate CFM's (cubic feet / minute) and therefore, should not be used for pond and lake aeration. Maumee Bay Aquatics suggests using the following compressors: For water resources less than 19 ft. deep, a 1/3 HP rotary vane will provide outstanding results. Listed below are the highlights of the 1/3 HP rotary vane compressor:
Click for benefits.	Provides high volume and low pressure (O PSI = 4 CFM; 5 PSI = 3.7 CFM; 10 PSI = 3.3 CFM) Oil less carbon vanes (vanes automatically adjust as they wear to maintain efficiency) Easy serviceability Low vibration Quiet Virtually maintenance free Scheduled maintenance include

	$410.00
	Replace the carbon vanes every 3.5 years or 5,000 hours, whichever comes first. Wash filter felts in warm soapy water, dry well and replace, initially at 500 hours, again at 1,000 hours and replace at 1,500 hours, thereafter.



	Electric Air Compressors For water resources greater than 19 feet deep, a piston type compressor is required and provides excellent results. Listed below are the highlights of the 1/3 HP rocking piston compressor: * Provides low volume and high pressure (20 PSI = 2 CFM; 40 PSI = 1.80 CFM; 50 PSI = 1.70 CFM; 100 PSI = 1.20 CFM)
	Oil-less (delivers uncontaminated air which helps compressor stay clean and service free for longer) Quiet Rugged construction Aluminum cylinders, head and pistons resist corrosion for longer life Almost maintenance free Scheduled maintenance includes: Replacing cup, cylinders and O-rings at 14 years or 20,000 hours, whichever comes first

	$550.00 Please note - If your water resource is very large or if your electrical outlet is far from the water's edge, then a larger compressor will be needed. Ask your sales representative for a detailed explanation on this topic.

Other Equipment
	Listed below is the additional equipment that accompany the air compressor systems. 1. Aluminum and brass manifold assembly which includes: 2 port manifold assembly$110.00 3 port manifold assembly$130.00 4 port manifold assembly$150.00 All manifold assemblies are assembled and ready for delivery. Greater than a 4 port manifold is available upon request. 2. Electromechanical timer$65.00


	3. Weighted air line (1/2" I.D.)$1.50/ft.
	3. Weighted air line (1/2" I.D.)$1.50/ft.


	4. EPDM disk diffusers a. 10" $75.00 b. 14" $115.00 c. 20" $150.00 Includes: stand, rope and float and completely assembled. 5. Powered coated galvanized metal enclosure, tan in color. Includes blower fan. $227.50


Parts
	Heat reducing hose$0.15/ft. Styrofoam float$0.70

	110 or 220 Volt air compresser cooling fan$00.00

	Pressure relief valve$10.82

	Brass ball valve (1/2")$4.00


	Glycerine pressure gauge$20.00

	Replacement filter$10.29

	Filter/silencer assembly$20.00 "FS" Series:1/4"-1" MPT
	Strong carbon steel construction offers strength while plastic models easily snaps off Simple threaded connection saves on labor costs involved with special tapping into reservoir Twist turret top design allows for speedy element change out Various connection sizes and media to choose from Durable polyester media element provides maximum efficiency and surface area